The shower is a tool that people need for daily showers. Many people ask someone to install it. In fact, the installation of the shower can also be done by yourself. The installation of the shower is divided into six steps: the installation of the curved angle of the shower, the installation of the decorative cover, the installation of the shower faucet, the installation of the shower bracket, the installation of the pull-out pole, and the installation of the top spray hand spray. Let's see the detailed operation below.
1. Shower curved angle installation
Drain a small amount of water to wash away the dust and impurities in the hot and cold pipes, then take out the connecting curved corner and beat the raw material belt for 15-20 turns, put it into the water outlet, rotate it for 3-4 turns, and then install the curved corner vertically. When installing the curved angle, the force should be light to avoid cracks and water leakage.
2. Install the decorative cover
Take the two decorative caps and screw them clockwise into the curved corners.
3. Shower faucet installation
Take out the shower faucet and connect it to the curved corner, then wrap the nut with a cloth, and cause scratches when tightening it. Finally, check whether the faucet is installed horizontally.
4. Shower bracket installation
Drill holes according to the marked positions. Before drilling, you must pay attention to whether there are pipelines in the wall to prevent water pipes and wires from being hit; in addition, you should use a special drill bit according to the material of the wall when drilling.
5. Install the pole
When inserting the vertical rod, it is necessary to pay attention to whether the sealing water O-ring is deformed, and the overlap of the two pipes should be deep enough to prevent the overlap of too short and cause water leakage.
6. Install top spray and hand spray
Screw the top spray to the water outlet of the elbow, connect the hand spray, the top spray and the hose, and then connect it with the transfer switch. Each connection port must be installed with a water sealing washer.
Finally, just turn on the faucet to see if it can be used normally and whether there is any water leakage, and the installation is completed here.
Since the installation of the shower requires more tools and certain technical requirements, for those with poor hands-on ability, the editor still recommends purchasing a packaged shower.
Lurain's mission is to continuously explore outstanding solutions for future water terminals and promote the harmonious coexistence of man and water. The continuous exploration of people's future water use methods and terminal water appliances will endue water with culture and reiki , so that water can better serve human beings and enjoy water.Are you planning to decorate a new bathroom?Don't worry , you can find everything you need from our extensive product line , from premium lavabo mixers to functional shower mixers.
(Part of the material on this website comes from the Internet. If the information displayed on this website infringes your copyright or other legitimate rights and interests, please notify us in time, and this website will be deleted in time.)